The new KatanaS 50e was designed by Italian aerobatic pilot, Sebastiano Silvestri and the design is based on of his successful and famous "KatanaS" Tournament Of Champion's competition airplane. This professional ARF kit is the result of Sebastiano's long research in 3D performance. This combined with an extremely lightweight structure, the all wood airframe, the big control surfaces give this model an impressive thrust-to-weight ratio and crisp control authority at any airspeed and flight conditions. Each aileron is controlled by an individual servo. Short, direct linkages make roll control precise, positive, dependable and easy to set up. Large control surfaces and full deflection throws enables to react quickly to 3D control inputs. Knife edge, high alpha, inverted, upright... these and any other extreme maneuvers you can think of are at your command with this exciting aerobat! The beautifully molded fiberglass cowl and wheel pants are expertly painted to match the trim scheme. From every angle this model is a stunner! Distinctively different factory applied trim schemes on the top and bottom make easy to follow the model orientation during aerobatic maneuvers.
The KatanaS 50e can do it all unbelievable easy harriers, torque rolls, blenders, waterfalls and almost anything else you can dream up are waiting you!
Wing Span: 146 cm
Lenght: 146 cm Wing Area:49 dm2
Weight: 2.250 g. RTF less battery
Radio: 4 Ch. with 4 standard servos
Recomm. power set up:
Motor: Hacker A50-14S
ESC: Hacker Master Basic 70A ESC SB
Battery: Top Fuel 3800-5S or 4500-5S
Propeller: APC 16x8E or 16x10E
- High contrast color scheme
- Lightweight balsa/ply construction
- High quality pre-painted fiberglass cowl and wheel pants
- Tail surfaces with airfoils
- Removable two piece plug-in wings
- Covered in authentic UltraCote
- Control surfaces: Ailerons, Elevator and Rudder
- Fully illustrated, step-by-step instruction manual
- Complete hardware package
- Pre-painted aluminum landing gear
- Wing Span
- Wing Area
- 49 dm2
- 2.250 kg RTF less battery
- Radio Required
- 4 Channel - 4 standard Servos
Be The First To Review This Product!
Help other Albury RC Models and Hobbies users shop smarter by writing reviews for products you have purchased.