Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g), or models requiring up to 85 watts of power.

  • Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Ideal for models requiring up to 85 watts of power
  • Integrated prop saver design
  • Mount, prop adapter and hardware included
  • External rotor design with 3.2mm shaft
  • Low noise level
Type
Brushless outrunner
Size
180/280 replacement
Bearings or Bushings
Two 3.175 x 7.94 x 3.6mm Bearings
Recommended Prop Range
6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
Voltage
7.2–11.1V
RPM/Volt (Kv)
1380
Resistance (Ri)
.33 ohms
Idle Current (Io)
.40A @ 8V
Continuous Current
7A
Maximum Burst Current
9A (15 sec)
Cells
6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
Speed Control
8–10A brushless
Weight
24 g (.8 oz)
Overall Diameter
28mm (1.10 in)
Shaft Diameter
3.17mm (1/8 in)
Overall Length
22mm (.90 in)
SKU EFLM1150
Brand E-flite

Be The First To Review This Product!

Help other Albury RC Models and Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought