The Bell 412 helicopter is a developed version of the 212 model which was released on September 8, 1978. Its features are the advanced four-blade rotor design that replaced the two-blade rotor system of the Bell 212. This was the first multi-blade rotor helicopter officially put into production by the company.
Features
Smart GPS helicopter, Easy to fly
The RTF version has everything you need to get up in the air. The GPS stability features make the helicopter very easy to take off and hover in place without any much stick inputs.
ACE Flight Controller
The ACE flight controller incorporates technologies derived from the H2 flight control system. Specifically developed for the FLYWING series of helicopter, it features a built-in GPS module for more stable communication, an M10 multi-mode chip that supports M10 GPS navigation for enhanced signal strength. Paired with FLYWING custom core systems, it delivers a superior flight experience.
Return to Home
The helicopter can automatically return to the take off location and land safely on the flip of a switch or when Battery voltage reaches a certain set voltage value.
GPS Positioning mode
In GPS mode, the Helicopter is as simple and easy to fly as a drone. It supports M10 GPS positioning assist and barometric altitude assist enabling stable hover at fixed location and altitudes. Stick inputs move the helicopter. Releasing the stick inputs brings the helicopter to a stop and steady hover.
ATTitude Self-Leveling mode
The ATTitude Self-leveling mode utilizes a high-precision gyroscope + accelerometer and barometer working in tandem to automatically correct flight attitude in real-time. Unlike GPS mode, releasing the control sticks will not trigger automatic braking, instead, the helicopter returns to a level attitude autonomously. Compared to manual mode it offers significantly reduced difficulty but still offers more hands-on engagement than GPS mode.
Co-ordinated Turns
When you combine forward stick with rudder to initiate a turn, the flight controller continuously measures speed and automatically applies the precise amount of Roll. This keeps the fuselage smoothly banked throughout the maneuver, cutting the turning radius while maintaining a graceful, scale-like flight path. The result is tighter more aerobatic looking turns without any extra stick input from you – just push forward and yaw.
3 New Flight Sensitivity modes
The helicopter has built-in three flight sensitivities, which can be switched by the remote control switch.
- Soft Mode: the maximum flight speed, maximum flight angle and reaction speed of the helicopter will be limited. This mode is very suitable for the novice to operate the helicopter.
- Normal mode: the maximum flight speed, the maximum flight angle and the reaction speed of the helicopter are faster than the soft mode, and the mode is very suitable for daily helicopter flight.
- Sport mode: the maximum flight speed, maximum flight angle and reaction speed of the helicopter will all reach the maximum flight control value. At this time, the helicopter is very flexible and the flight speed is very fast. It is recommended that experienced players use it in an open field.
High-Precision Remote Control
The RTF version includes a high-precision 10 Channel Remote Control and receiver with radio range of about 1 Km. The switches are clearly assigned to different functions. The self centering sticks put the helicopter in a steady hover when sticks are let go off (GPS mode).
The Helicopter also supports third party receivers with SBUS protocol so you can use a Radio Controller system of your choice.
Compass Calibration from Remote Controller
Like the H2, the ACE flight controller allows compass calibration to be triggered directly from the remote control transmitter. No need to carry a computer, simply toggle the mode switch three times to enter calibration mode. Rotate the helicopter while observing the LED indicator (which changes from red to yellow and finally green) to monitor progress. The system will automatically reboot after calibration.
| SKU | FW-BELL-412 |
| Barcode # | 2000000042534 |
| Brand | Flywing |
Be The First To Review This Product!
Help other Albury RC Models and Hobbies users shop smarter by writing reviews for products you have purchased.
More info