E-flite
E-Flite SNJ-5 AT-6 Texan 1.5m RC Plane, BNF Basic
$599.99
Make 4 interest-free payments of $150.00 fortnightly and receive your order now.
The Hangar 9® P3 Revolution 60cc giant scale biplane is an exclusively licensed model of the radical new aircraft design for Skip Stewart Airshows. Like the full-size, the outline of the P3 Revolution 60cc is unconventional in practically every aspect. The actual aircraft Skip Stewart will fly in the very near future gets its lightweight specifications from advanced composite construction. World-class RC pilot, Mike McConville, has engineered this model using lightweight all-wood construction. It’s a level of durability that’s critical to hardcore 3D performance in this size class, plus it allows genuine UltraCote® film to deliver a finish that’s resilient as it is beautiful.
One look at the enormous double-beveled control surfaces and it’s easy to tell this airplane was purpose built for outrageous 3D maneuverability. In contrast, the stretched fuselage and high-aspect ratio of its tapered wings suggests precision aerobatics is within the performance envelope. When matched with the recommended Spektrum electronics and 60cc-size gas engine, you can tune this unique biplane any way you like. You’ll get vertical pull to yank this big bipe out of a hover, and the precision to wail through crank-shaft rollers and hard snap in ways that would red-eye any pilot in the full-scale world.
Convenience features like plug-in wings and stabilizers mean that getting the P3 Revolution to the field is no problem. Completed features like factory-hinged ailerons and elevators, a pre-drilled firewall, and a complete high-quality hardware package mean you won’t be at the work bench very long. Even a pilot figure with the likeness of Skip Stewart is included so you can experience the future of airshow aerobatics right at your home field.
Exclusive License
The P3 Revolution 60cc model is produced with an exclusive license by Skip Stewart Airshows and features the same complex graphics as the original with a Genuine UltraCote® film finish. To top it off, even the included pilot figure looks like Skip Stewart.
Mike McConville Design
World class RC pilot, Mike McConville designed this model to offer breakthrough performance to 3D pilots looking for the advantages an advanced biplane design can deliver.
Plug-in Wings and Tail
The two-piece, plug-in wings feature carbon-fiber joiner tubes and tool-free I-strut installation. The two-piece, plug-in horizontal stabilizers also have a carbon-fiber joiner tube and simply bolt to the fuselage side.
Highly Pre-Fabricated
The all-wood structure features lightweight laser-cut construction with locations for all the accessories already cutout. To further speed the assembly process, hinges for the aileron and elevators have been factory installed.
Fiberglass Cowl and Wheel Pants
The fiberglass cowl and wheel pants color match the vibrant trim scheme. The landing gear is fabricated from high-strength aluminum and also have a matching black paint finish.
Complete Hardware Package
The high-quality hardware pack features heavy-duty ball-link connectors and dual-plate fiberglass control horns that help make final pushrod adjustments simple. Even the fuel tank is included.
| SKU | HAN4630 |
| Barcode # | HAN4630 |
| Brand | Hangar 9 |
| Shipping Weight | 6.0000kg |
Help other Albury RC Models and Hobbies users shop smarter by writing reviews for products you have purchased.
E-flite
$599.99
Make 4 interest-free payments of $150.00 fortnightly and receive your order now.
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Albury RC Models and Hobbies’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Albury RC Models and Hobbies’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Shop 321A Wagga Road, Lavington NSW 2641. Our ABN is 43602665074. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
Any enquiries should be addressed to:
Attention: Albury RC Models & Hobbies
Email: via contact form (on this page)
Phone: (61 2) 6025 0497
Postal:
321A Wagga Road
Lavington, NSW 2641
Albury RC Models & Hobbies is committed to protecting your privacy and implementing technology that gives you the most powerful and safe online experience.
This Statement of Privacy applies to the Albury RC Models & Hobbies website and governs data collection and usage. By using the Albury RC Models & Hobbies website, you consent to the data practices described in this statement.
The Albury RC Models & Hobbies is also committed to implementing the National Privacy Principles outlined in the Commonwealth Privacy Amendment (Private Section) Act 2000. These principles regulate the collection, use, handling and storage of personal and system information.
For detailed information about the legislation go to the Federal Privacy Commission website http://www.privacy.gov.au/
In abiding by the National Privacy Principles Albury RC Models & Hobbies will:
In addition, information may be collected and recorded to satisfy Albury RC Models & Hobbies legal obligations not disclose or distribute personal, sensitive or health information collected from its consumers without the consumer’s specific consent or unless required to do so by law. Albury RC Models & Hobbies may distribute aggregated statistical information for reporting purposes, but information that is personally identifying will not be disclosed to third parties disclose, with consent, from time to time, personal, sensitive and health information to others for administrative purposes.
The Albury RC Models & Hobbies website makes some use of data that directly or indirectly identifies users. We take great care with practices that affect personal privacy. Specific details are described below:
At times you may be asked to complete survey questionnaires that appear on the Albury RC Models & Hobbies website. These may include your providing identifiable information. You will be given the reasons for the collection of such information and the purpose for which it will be used. By participating in the questionnaire or survey, you are accepting certain additional terms and conditions relating to the use of the information you provide.
Your name and address details will not be added to a mailing list, nor will officers disclose these details to third parties without your consent unless required by law. Email messages may be monitored by our website support staff for system trouble shooting and maintenance purposes.
Although every effort will be made, the Albury RC Models & Hobbies cannot guarantee to reply to emails. Some email received by the Website Administrator may be forwarded to other officers for appropriate action.
Though this site provides facilities for securely transmitting information across the Internet (SSL and encryption), it is recognised that there can be risks with transmitting information across the Internet. This site may contain links to websites not managed by the Albury RC Models & Hobbies. For those sites, the Albury RC Models & Hobbies is not responsible for the privacy or security practices or the content of such websites.
Information collected within the website files and logs are stored on secured servers to prevent unauthorized access.
The Albury RC Models & Hobbies website use “cookies” to help you personalize your online experience. A cookie is a text file that is placed on your hard disk by a web server. Cookies cannot be used to run programs or deliver viruses to your computer. Cookies are uniquely assigned to you, and can only be read by a web server in the domain that issued the cookie to you.
The purpose of a cookie is to tell the Web server that you have returned to a specific page. This storage lasts in the browser’s memory while the browser is active. The Albury RC Models & Hobbies website checks to see if cookies and java script have been enabled within your browser settings. If not, a message is sent to suggest that you enable these features within your security settings.
Most browsers can be set to accept or reject cookies. You can choose to adjust your browser to reject cookies or to notify you when they are being used. Please note – rejecting cookies may limit the functionality of the Albury RC Models & Hobbies website.
Albury RC Models & Hobbies will occasionally update this Statement of Privacy to reflect the organisation, legislation and customer feedback. Albury RC Models & Hobbies encourages you to periodically review this statement to be informed of how Albury RC Models & Hobbies is protecting your information.
Albury RC Models & Hobbies welcomes your comments regarding this Statement of Privacy. If you believe that Albury RC Models & Hobbies has not adhered to this statement, please contact Albury RC Models & Hobbies – Website Administrator. If you would like further information about the way Albury RC Models & Hobbies manages the personal information it holds, please contact Albury RC Models & Hobbies.
Add your favourites to cart
Select Afterpay at checkout
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit https://www.afterpay.com/terms
More info