The Extra 300S RC plane from Phoenix Models is expertly handcrafted from balsa and plywood and is capable of performing exhilarating manoeuvres.

Features

  • Designed for compatibility with both GP and EP flight
  • Covered in genuine ORACOVER®
  • Bolt-on two-piece wing for easy transport and setup at the field
  • Removable canopy for easy change lipo battery and set up radio
  • Strong Light Weight Construction
  • High-quality hardware package included
SKU PHN-PH009
Brand PHOENIX MODEL

Phoenix Model Extra 300S

By: on 19 April 2021
This is a great plane to fly. The build quality is mid range. The rear stab fits tight into the frame so there is no way you can glue it in like the instructions says. I used light CA after I aligned it. Some parts of the fuse were not glued so it would pay to check the whole frame out and apply light CA to the areas you can get to. The motor mount is a little flimsy for a 6S plane so I beefed mine up by not using the supplied ply pieces but using an 8mm pine piece. The cowl design is awesome with the black brackets. The servo mounting plates could be a tad thicker for the big recommended servos. The landing gear piece was bent beyond belief so I had to straighten it in a vice to get the plane to site level. The landing gear mounting Tnuts were over-glued meaning glue had gotten down into the threads which was easily fixed by tapping out the holes. Again the battery tray seems light (Flimsy) for a recommended 6S battery but it works. I have put 6 bats through this plane and I must say it flies like its on rails.. and its super smooth. The recommended throws are light but thats each persons opinion. I would definitely recommend beefing up the glue and battery tray. All in all nice flyer. https://www.youtube.com/watch?v=ctGbpnBg1-g&t=3s
(5)

Write a product review

Others Also Bought