Features:

  • "Tarheel Hal" livery flown by Lt. Ike Davis during WWII
  • Complete Balsa and lite-ply construction for rigidity and durability
  • Covered from tip to tail in scale details including weathering, simulated panel lines and rivets
  • Cowling is completely made of fiberglass for strength and appearance
  • The hand-painted pilot is ready for your added cockpit details
  • Center-mounted bomb and wing-mounted pylons for added scale detail
  • All control surfaces come out of the box pre-hinged and installed for convenience
  • Flaps, antenna, guns and more complete the fantastic scale appeal
  • Large battery hatch allows for your chosen electric or gas setup

Includes:

  • VQ P-47D Thunderbolt "Tarheel Hal" 1500mm (59") Wingspan - ARF
  • Wheels and struts
  • Fuel tank, hardware and servo trays

Requires:

  • 7 Channel radio 
  • 7 Channel receiver 
  • 400Kv brushless outrunner motor 
  • 85 Amp brushless ESC 
  • 4x 17g standard servos for ailerons and flaps 
  • 2x 45g standard servos for elevator and rudder
  • Electric retracts for the landing gear
  • 6 Cell 22.2V 5000 mAh LiPo Battery 
  • Electric propeller
  • 6 Cell compatible battery charger 

Gas Requires:

  • 2 stroke engine 
  • 2 blade gas propeller 

Customer Note

VQ ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).

Model Scale

1/8

Wingspan

1500mm / 59in

Length

1215mm /47.8in

Weight

3200g / 112.87oz

CG (Center of Gravity)

Refer to the manual

Power System

400Kv brushless outrunner motor for electric or 2-stroke for gas (required)

Electronic Speed Control

85A (required)

Propeller / EDF

15x10 2-blade for electric or 11x7 2-blade for gas (required)

Servos

  • 4x 17g standard servos for ailerons and flaps 
  • 2x 45g standard servos for elevator and rudder 

Landing Gear

Electric retractable (required)

Required Battery

6 Cell 22.2V 5000mAh LiPo battery (required)

Required Radio

7+ Channel (required)

Ailerons

Yes

Elevator

Yes

Rudder

Yes

Flaps

Yes

Lights

No

Hinge Type

Nylon

Material

Balsa and light plywood

Skill Level

Intermediate

Build Time

6+ Hours

Recommended Environment

Outdoors

SKU VQA142DT
Brand VQ MODELS

Be The First To Review This Product!

Help other Albury RC Models and Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought